Tribblix: manual page: pkgadd.8

PKGADD(8) Maintenance Commands and Procedures PKGADD(8)

NAME

pkgadd - transfer software packages to the system

SYNOPSIS

DESCRIPTION

pkgadd transfers the contents of a software package from the
distribution medium or directory to install it onto the system. Used
without the -d device source specifier, pkgadd looks in the default
spool directory (/var/spool/pkg) for the package. Used with the -s
option, it writes the package to a spool directory instead of
installing it.

The pkgadd utility requires an amount of temporary space the size of
the package that is being installed. pkgadd determines which
temporary directory to use by checking for the existence of the
$TMPDIR environment variable. If $TMPDIR is not defined, pkgadd uses
P_tmpdir from stdio.h. P_tmpdir has a default of /var/tmp/.

Certain unbundled and third-party packages are no longer entirely
compatible with the latest version of pkgadd. These packages require
user interaction throughout the installation and not just at the very
beginning, or require that their request scripts be run as the root
user.

To install these older packages (released prior to Solaris 2.4), set
the following environment variable: NONABI_SCRIPTS=TRUE

As long as this environment variable is set, pkgadd permits keyboard
interaction throughout the installation and package request scripts
are run as root.

If you have package request scripts that require running as user root
(instead of noaccess [the default] or user install), use the
rscript_alt parameter in the admin(5) file to make an appropriate
selection. See admin(5).

Note that, in Solaris 8 and Solaris 9, the default user when running
a request script was either root or nobody, depending on the
operating system's patch level. In the current release, the default
user is noaccess.

When running pkgadd in the global zone (see zones(7)), a package that
contains a request script (see pkgask(8)) is added only to the global
zone. The package is not propagated to any current or yet-to-be-
installed non-global zone. This behavior mimics the effect of the -G
option, described below.

Package commands are largefile(7)-aware. They handle files larger
than 2 GB in the same way they handle smaller files. In their current
implementations, pkgadd, pkgtrans(1) and other package commands can
process a datastream of up to 4 GB.

The -d, -Y, and pkginst arguments shown in the SYNOPSIS are described
under OPERANDS, following OPTIONS.

OPTIONS

The supported options are described as follows. The -d device source
specifier is described under OPERANDS, below.

-a admin

Define an installation administration file, admin, to be used in
place of the default administration file. The token none
overrides the use of any admin file, and thus forces interaction
with the user. Unless a full path name is given, pkgadd first
looks in the current working directory for the administration
file. If the specified administration file is not in the current
working directory, pkgadd looks in the /var/sadm/install/admin
directory for the administration file.

-G

Add package(s) in the current zone only. When used in the global
zone, the package is added to the global zone only and is not
propagated to any existing or yet-to-be-created non-global zone.
When used in a non-global zone, the package(s) are added to the
non-global zone only.

This option causes package installation to fail if, in the
pkginfo file for a package, SUNW_PKG_ALLZONES is set to true. See
pkginfo(5).

-M

Instruct pkgadd not to use the $root_path/etc/vfstab file for
determining the client's mount points. This option assumes the
mount points are correct on the server and it behaves
consistently with Solaris 2.5 and earlier releases.

-n

Installation occurs in non-interactive mode. Suppress output of
the list of installed files. The default mode is interactive.

-r response

Identify a file or directory which contains output from a
previous pkgask(8) session. This file supplies the interaction
responses that would be requested by the package in interactive
mode. response must be a full pathname.

-R root_path

Define the full path name of a directory to use as the root_path.
All files, including package system information files, are
relocated to a directory tree starting in the specified
root_path. The root_path may be specified when installing to a
client from a server (for example, /export/root/client1).

Note -

The root file system of any non-global zones must not be
referenced with the -R option. Doing so might damage the global
zone's file system, might compromise the security of the global
zone, and might damage the non-global zone's file system. See
zones(7).

-s spool

Write the package into the directory spool instead of installing
it.

-v

Trace all of the scripts that get executed by pkgadd, located in
the pkginst/install directory. This option is used for debugging
the procedural and non-procedural scripts.

-V fs_file

Specify an alternative fs_file to map the client's file systems.
For example, used in situations where the $root_path/etc/vfstab
file is non-existent or unreliable.

When executed without options or operands, pkgadd uses /var/spool/pkg
(the default spool directory).

OPERANDS

The following operands are supported:

Sources

By default, pkgadd looks in the /var/spool/pkg directory when
searching for instances of a package to install or spool. Optionally,
the source for the package instances to be installed or spooled can
be specified using:

-d device
-d datastream pkgname,... | all

Install or copy a package from device. device can be any of the
following:

o A full path name to a directory or the identifiers for
tape, floppy disk, or removable disk (for example,
/var/tmp or /floppy/floppy_name).

o A device alias (for example, /floppy/floppy0).

o A datastream created by pkgtrans (see pkgtrans(1)).
The second form of the -d specifier, above, indicates the syntax
you use when specifying a datastream. In this case you must
specify either a comma-separated list of package names or the
keyword all.

Instances

By default, pkgadd searches the specified source, and presents an
interactive menu allowing the user to select which package instances
found on the source are to be installed. As an alternative, the
package instances to be installed can be specified using:

pkginst

The package instance or list of instances to be installed. The
token all may be used to refer to all packages available on the
source medium. The format pkginst.* can be used to indicate all
instances of a package.

The asterisk character (*) is a special character to some shells
and may need to be escaped. In the C-Shell, the asterisk must be
surrounded by single quotes (') or preceded by a backslash (\).

-Y category[,category...]

Install packages based on the value of the CATEGORY parameter
stored in the package's pkginfo(5) file. All packages on the
source medium whose CATEGORY matches one of the specified
categories will be selected for installation or spooling.

EXAMPLES

Example 1: Installing a Package from a Solaris DVD

The following example installs a package from a Solaris DVD. You are
prompted for the name of the package you want to install.

example# pkgadd -d /cdrom/cdrom0/s0/Solaris_10/Product

Example 2: Installing a Set of Packages from a Datastream

The example command shown below installs all of the packages in the
datastream specified by the -d source specifier. Prior to this
command, this datastream must have been created with the pkgtrans(1)
command.

example# pkgadd -d /var/tmp/datastream all

The keyword all specifies that all of the packages found in the
designated datastream will be installed.

EXIT STATUS

0

Successful completion

1

Fatal error.

2

Warning.

3

Interruption.

4

Administration.

5

Administration. Interaction is required. Do not use pkgadd -n.

10

Reboot after installation of all packages.

20

Reboot after installation of this package.

FILES

/var/sadm/install/logs/

Location where pkgadd logs an instance of software installation.

ATTRIBUTES

NOTES

When transferring a package to a spool directory, the -r, -n, and -a
options cannot be used.

The -r option can be used to indicate a directory name as well as a
filename. The directory can contain numerous response files, each
sharing the name of the package with which it should be associated.
This would be used, for example, when adding multiple interactive
packages with one invocation of pkgadd. In this situation, each
package would need a response file. If you create response files with
the same name as the package (for example, pkinst1 and pkinst2), then
name the directory in which these files reside after the -r.

The -n option causes the installation to halt if any interaction is
needed to complete it.

If the default admin file is too restrictive, the administration file
may need to be modified to allow for total non-interaction during a
package installation. See admin(5) for details.

March 2, 2017 PKGADD(8)